Release Notes

The release notes give a brief description of any changes made. Green indicates improvements and new capabilities. Red indicates problem resolutions. Boldface entries are operational changes.

In order to download the software update you must be a registered user with Client status and be logged in.

TS V7.324 - 24 January, 2014

TS V7.324 - 24 January, 2014

Borehole Imaging - the program now shares data in some situations between multiple tracks on an image that are drawn from the same image file. This should improve the performance when drawing the display.

Correlation - in zig-zag mode, one may now cause a well to be repeated (at the right of the section). Right click on the reference map on the well to be repeated and choose "Add well again to section".

Mapping - in the special mapping function mode, maps made that post rose diagrams now have a scaling factor for the rose based on the largest petal. If set to a non zero value, roses with larger petals will plot larger on the map.

Data Loading - the azimuth can be set as a loading parameter when loading core photos.

Petrophysics - Net Pay - the property sheet will always display as the top window.

TCL Macro Processing - a new function has been added to back calculate the deviation survey from the TVDSS, XDEV and YDEV curves. This can be used as an orientation method for core photos or images if no other information is available. It can also be used as a quality control method against other orientation data.

DLIS Data Loading - a problem loading user defined images in the DLIS loader has been fixed.

TS V7.323+ 20 January, 2014

TS V7.323+ 20 January, 2014

This patch release fixes a specific problem restoring the well display template used with a previously stored cross section.

TS V7.323 - 16 January, 2014

TS V7.323 - 16 January, 2014

Synthetic Seismogram - a Select File button has been added for loading a user defined wavelet. The header labeling for user defined wavelets has been improved.

IMAGELOG - improved thin bed removal and added the ability to remove overlapping lithology and facies beds in IMAGELog lithology and facies tracks.

DLIS Loading - a potential crash condition when loading certain image types has been resolved.

Map Import - multi valued Z values can now be loaded during map import. To use this feature, activate the Use Merging checkbox when selecting or creating a map. Then use the Add Z Multiple setting for merging the Zs. This does not permit mixed methods - it will always add a multiple if the Z is found in the existing map.

TS V7.322 - 08 January, 2014

TS V7.322 - 08 January, 2014

Sonic Waveform - performance for the frequency dispersion calculation has been improved.

IMAGELog - Tadpole and SCAT tracks - breakouts and linear features can now be displayed on a borehole lowside basis.

IMAGELog - Synthetic Seismogram track - a problem when using a user defined wavelet file has been addressed.

IMAGELog - top markers within IMAGELog can now be plotted from stratigraphy files instead of a map file if desired. To do this, add a Stratigraphy track at the far right of the template, then use the Overlay function to post the tops on the display.

Map Data Management - an explicit option to delete a map data set has been added.

DLIS Import - comment sections in an incoming DLIS file are now stored in the .params report file.

DLIS Export - the ability to include comment files when writing a DLIS file has been enhanced. Control for this feature is found under the Advanced Options.

Petrophysics - the regression line form names under crossplot have been clarified.

Synthetic Seismic - a wavelet can now be loaded from a file that is formatted as SEGY.

Petrophysics - Net Pay - a problem when computing ratios in units other than the well depth units has been fixed.

TS V7.321 - 11 December, 2013

TS V7.321 - 11 December, 2013

Sonic Waveform - selected waveform parameters for a Sonic Waveform track are now saved in a configuration file for later access.

Sonic Waveform - the Compute Semblance button has been replaced by an Accept button.

Plotting - a problem with text display in large EMF plots has been fixed.

TVD - new QC plots have been added to the TVD module.

Synthetic Seismic - a problem with user defined wavelets (introduced in TS version 7.320) has been resolved.

Data Loading - a problem adding a new well if the name matched an existing well has been fixed.

IMAGELog - an option to set the size of the symbols used in a show track is now available.

TS V7.320 - 4 December, 2013

TS V7.320 - 04 December, 2013

IMAGELog - some problems with borehole diameter presentation when core photos overlap have been resolved.

IMAGELog - Pressure Model track - a potential issue of incorrect overburden pressure in offshore wells has been addressed. It was possible for the pressure of the water column to be added from the top of the well interval in certain circumstances.

IMAGELog - Synthetic Seismogram track - a potential crash condition when the user defined wavelet is undefined has been prevented.

Plotting - in plots containing a degree symbol, warning messages could be seen if using Adobe to view PDF output. This has been corrected.

Data Loading - WITSML data loading supports an additional variant of the incoming file structure.

Data Loading - a problem when loading "fast" curve data from LAS files has been resolved.

Data Export - the rules for output file names have been relaxed.

Dip Analysis - some problems with the auto scaling and start position have been resolved for azimuthal vector plots.

IMAGELog - paged plots might skip plotting of track headers in certain one page plot situations. This has been fixed.

Correlation - a problem with the deflection mode type toggle being corrupted which occurred when using a very long IMAGELog template file name has been corrected.

Data Loading - the DLIS loader now handles incoming "text" curves correctly. The data is not loaded unless the text resolves to a number, but other curves present are now handled appropriately.  Most DLIS files do not use this approach.

Correlation - the ability to compute intersections of a target well with selected image picks from a source well is now available.

Plotting - a problem with coordinate overflow when creating large EMF output plots has been fixed. This might cause the drawing to miss certain elements.

TS V7.319 - 22 November, 2013

TS V7.319 - 21 November, 2013

General - a problem with the first depth in core data files has been fixed.

Borehole Imaging - a potential problem with pick truncation when the pick was reoriented via the pick association panel has been resolved.

Petrophysics - a problem with deviation survey curve creation in EQUUS has been resolved.

General - the IMAGELog header system now support the display of well coordinates in degrees/minutes/seconds format.

General - network installations of TerraStation can now configure a user specific location for the userdata folder.

New utilities in support of this option have been added to the execs folder.

To configure userdata (and the default project location folder) for an existing network client, run the program "client_registry.exe".

TS V7.318 - 14 November, 2013

TS V7.318 - 14 November, 2013

Correlation - borehole image picks can now be shown in cross section dip displays. You must use the Spider Fence option, select your section, and use an IMAGElog template with a Formation View track present in it. Then use Well Display - Dip Display tab and check the Dip Display box on.

Sonic Waveform - coherence calculations can now do multi shot stacking. Multi-shot coherence computes semblance independently for each stack. Each stack is defined by the transmitter. The number of receivers equals the total number of receivers + 1 - number of stacks, in such a way that the same depth interval is spanned by each stack. The resulting semblances are averaged.

Sonic Waveform - the Instantaneous Frequency display now shows negatives.

IMAGELog - Show Data Track - new options have been added to the show track to display left or right pointing triangles, and to permit symbol only displays.


Data Loading - a curve name extension can be added before a run suffix when loading well data.

TS V7.317 - 8 November, 2013

TS V7.317 - 8 November, 2013
IMAGELog - a problem with the display of comments associated with facies symbols has been fixed.
Borehole Imaging - the offsets for XRMI tool have been changed to reflect that the reference point for the tool is the lowest row, not the highest row.
This effects a shift up of 2.7 inches to all buttons.  The image does not change appearance, but the depth is shifted.
General - error reporting for file opening problems has been improved.
General - user preference settings for multi-threading and pop up window menu sizing have been added.
DLIS Export - an option for including comments within the new DLIS file has been added under Advanced Options.

TS V7.316 - 31 October, 2013

TS V7.316 - 31 October, 2013
General - projection testing for well coordinates entered from the Well Properties panel has been removed.
Plotting - a problem with restoration of IMAGELog templates while the plotting window is open has been resolved.
General - an option for managing TerraStation licenses at the window level has been added.  This will free, e.g., a sonic waveform license if all IMAGELog windows are closed, permitting another user access to the module.

TS V7.315 - 23 October, 2013

TS V7.315 - 23 October, 2013
IMAGELog - a "Restore Recent" option that provides a list of the 8 most recent templates has been added. It is on the File pulldown menu.
IMAGELog - Pressure Model Track - the KHMAX equation is now available to compute SHMAX.
IMAGELog - Pressure Model Track - more control has been added when defining the brittleness index in pressure modeling tracks.
General - network users of TerraStation can now use a Windows registry entry to identify the userdata folder location.  This permits individual users to customize the userdata location, and makes it available whereever one is located on the network.
A utility to manage this will be added soon, but please contact TERRASCIENCES for more information if you wish to manually configure this.
TCL - a potential crash when calling borehole correction routines from TCL has been fixed.
Petrophysics - new Weatherford borehole corrections have been added in support of the Compact AIT,  SFLA, and SFLB tools.

TS V7.314 - 17 October, 2013

TS V7.314 - 17 October, 2013
Borehole Imaging - a crash in the borehole visualization tool when displaying facies in a vertical well has been fixed.
IMAGELog - a problem with saving the text justification setting for stratigraphy tracks has been resolved.
General - when entering coordinates for a well in which the project projection is unset, program errors could result.  This has been corrected.
Petrophysics - curve utilities merging can now interact appropriately with "fast" curves, curves with a higher step rate than the well increment.
Petrophysics - a graphic display has been added to visualize the results of borehole corrections.
Petrophysics - some Weatherford borehole corrections have been added.
TCL - the new Weatherford borehole corrections can now be accessed via the TCL macro processor.
Borehole Imaging - breakouts and linear feature edits and deletions can now occur via the right click menu.
Borehole Imaging - a sequence problem with undoing breakout and linear feature edits has been fixed.
Borehole Imaging - Pick reclassification. A potential crash when re categorizing picks with no orientation data in the pick has been resolved.

More Articles...

Page 10 of 20